
Can I TRUST AF4K? Read what others have said here.
Brian Carling, AF4K - click here to place an order via e-mail.

6555 kHz to 14955 kHz - and - 7577.5 to 15927.5 kHz
The S-line and KWM-2/2A radios can operate anywhere between 3.4 MHz and 30 MHz. The transceivers
The amateur band crystals are usually located underneath the chassis of a KWM-2A.
These CR-18U crystals can also be used in the military type FRC-93 transceiver. These are made to the highest manufacturing
For use in the 32S-1, 32S-2, 32S-3, 32S-3A, 73S-2, 75S-3B, - 3C radios etc. Some models may
Most are $12.00 or $16.00 unless otherwise noted.
CRYSTALS FOR THE AMATEUR RADIO BANDS ARE LISTED IN RED
For many of these the price is still $12.00 or $16.00 each unless otherwise stated, plus shipping.
As used in many Drake, Heathkit, Hallicrafters, Hammarlund, Knightkit, National, Lafayette etc.
These are for the metal can crystals with pins spaced
HAM BAND FT243 CRYSTALS - CLICK HERE FOR LIST.
1 MHz to 2 MHz FT243 CRYSTALS - CLICK HERE FOR LIST.
2, 3 and 4 MHz FT243 CRYSTALS - CLICK HERE FOR LIST.
5, 6 and 7 MHz FT243 CRYSTALS - CLICK HERE FOR LIST.
8 - 30 MHz FT243 CRYSTALS - CLICK HERE FOR LIST.
FT241 CRYSTALS - CLICK HERE FOR LIST.
FT171B CRYSTALS for BC610 - CLICK HERE FOR LIST.
HC25/U CRYSTALS - CLICK HERE FOR LIST.
HC-33/U CRYSTALS - CLICK HERE FOR LIST.
HC49U CRYSTALS - CLICK HERE FOR LIST.
HC50/U CRYSTALS - CLICK HERE FOR LIST.
Antique and Large CRYSTALS - CLICK HERE FOR LIST.
73 from Brian ((( Amateur Radio G3XLQ / AF4K )))
Latest list always updated at:
See main page for special terms of sales to Canada.
SEARCH THIS SITE
Click 'BACK' to return here.

Type CR-18/u (HC6/U) metal can crystals available for all popular
Collins ranges. Most are $12.00 unless noted. Quantity discounts available.
I have almost ALL of these available - many in quantities. See chart below.
are normally supplied with crystals for the frequency ranges: 3.4-3.6, 3.6-3.8, 3.8-4, 7-7.2,
7.2-7.4, 14-14.2, 14.2-14.4, 14.8-15, 21-21.2, 21.2-21.4, 21.4-21.6 and 28.5-28.7 MHz
plus 23 additional 200 kHz positions for 28-29.7 MHz. Thes ecan be used for the WARC bands
or for general shortwave / HF operation.
The upper deck is for adding other frequency ranges.
standards with excellent tolerance to ensure that your radios are calibrated and right
on the frequency every time.
Dimensions: 1.5" X 0.75" - and the pins are spaced 0.486" apart. Pins 0.093" diameter

Type CR-18/u (HC6/U) metal can crystals available for all
popular Collins ranges from
6555 kHz to 14955 kHz
I have almost ALL of these available - many in quantities. See listings below.
WHILE THEY LAST!
require the addition of an additional switching deck. These are available for purchase
on line from K9STH:
http://k9sth.com/uploads/Additional_Crystal_Deck_For.pdf




and other fine amateur and shortwave receivers.
Frequency Standard 100 kHz TALL HC6U crystal with fat poins (0.093") like FT243.
These are made to the highest manufacturing
standards with excellent tolerance to ensure that your radios are calibrated and right
on the frequency every time.
Dimensions: 1.5" X 0.75" - and the pins are spaced 0.486" apart. PIns 0.093" diameter
NEW CERAMIC HC6/U SOCKETS
about 1/2" apart. These are new, ceramic sockets usable
all the way up to VHF. Single screw mount, with solder terminals.
Great for amateur radio homebrew or repairs.
For diagram and dimensions click here.
They have 0.486" pin spacing. Smaller diameter pins than FT243.
These mount with a single hole.
Available for $3.00 each or ten for $25.00 plus shipping.





PAYMENTS VIA PAYPAL GLADLY ACCEPTED!
To buy any item(s):

| Headphones |
Meters |
Mics |
MISC GOODIES |
Potentiometers |
radios |
Relays |
| Resistors |
Standoffs |
Switches |
Tools |
Terminal Boards |
Test Equipment |
Tubes |
Transformers |
Transistors |
Variacs |

Main Page